BONFIGLIOLI Active Cube Instructions d'exploitation télécharger pdf (Page 27)

2511/06

11/06 25

If a PC or a PLC is used as a master, the identifiers of the Rx/Tx-SDO1 can be

adapted by parameterization on the frequency inverter.

Attention! In free assignment of identifiers, there may not be any double occu-

pancy!

The identifier range 129...191 may not be used as the emergency tele-

grams can be found there.

The setting of the identifiers of the RxSDO1 is done via the parameter

RxSDO1-

Identifier

921.

Parameter Setting

No. Description Min. Max. Fact. sett.

921 RxSDO1-Identifier 0 2047 0

The setting of the identifiers of the TxSDO1 is done via parameter number 922.

Parameter Setting

No. Description Min. Max. Fact. sett.

922 TxSDO1-Identifier 0 2047 0

The setting "0” results in identifier assignment according to the Predefined Connection

Set.

The second SDO channel can be deactivated via the

SDO2 Set Active 923.

Operation mode Function

0 - SDO2 deactivated Communication channel deactivated

1 - SDO2 activated Communication channel activated for the visuali-

zation tool

The identifier assignment for the second SDO channel is always to the speci-

fication:

Identifier Rx-SDO2 = 1600 + Node-ID

Identifier Tx-SDO2 = 1472 + Node-ID

Note: In this way, firm identifiers via which communication takes place are

available for the visualization tool.

1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 53 54

Pas de commentaire

BONFIGLIOLI Active Cube Instructions d'exploitation Page 27